How to Deal With Leaking Pipes

Water damage in Savannah has an incredible ability to find its way into all sorts of strange places. In the ensuing evaluation, this can quickly fudge the outlines of who is responsible for water damage due to leaking pipes.  So who should you be talking to if you suffer water damage, and how should you deal with leaking pipes?

For property owners in Savannah, ServiceMaster of Savannah will always be your first port of call in a case of water damage in Savannah, as their technicians will identify repairs. This might include damage occurring as a result of defects in roofing, water leaking down through walls or pipes, and gutters servicing multiple apartments.  

ServiceMaster of Savannah is a water damage restoration company in Savannah, specializing in water damage restoration in Savannah that deals with leaking pipes in residential properties. Leaking pipes are a serious issue – if you are not at home when your system springs a leak or are otherwise unable to turn off your water supply at the stopcock, your property can become water-damaged, which could even affect its structural integrity. Repairing structural damage costs a fortune, so here’s how to deal with leaking pipes. 

The first steps to fixing a leaking pipe are to find your stopcock and switch off your water supply, or turn off the water valve to the problematic pipe. You might need a flat-head screwdriver to turn the water valve.

If the leak is simply caused by a loose joint, then you can tighten this joint with a little effort – you might need a spanner, but some joints can be tightened up perfectly by hand. If a pipe is leaking, you may have to remove the whole pipe and replace it with an exact duplicate to complete your emergency leak repair.

Bear in mind that it is not necessarily easy to unscrew a pipe – if you turn a threaded galvanized steel pipe to loosen one end, you will tighten it on the other end, and if you are replacing a copper pipe, you will have to sweat-solder it back into place! Therefore, it is understandable if you want to leave the pipe replacement work to a specialized plumber, but there’s no reason you can’t do it with a bit of patience and a lot of caution.

You want to completely drain all the water from the pipe so you don’t end up with gallons on the floor. When the water stops flowing from the pipe, you know it has been completely drained. Wipe the leaking pipe with a towel until it is completely dry. Leave this towel on the floor underneath the leaking pipe so you can catch any residual water that has not yet been expelled.

 

Still no luck? Contact us at 912-244-6966 and we can help! Our technical teams at ServiceMaster of Savannah will run through some simple troubleshooting tips with you to see if your problem can be resolved over the phone. If not, we’ll send a highly skilled and qualified technician round to get your plumbing problems sorted as soon as possible.  There could be a number of reasons for your plumbing issues, so it’s better to trust the professionals. After all, you could end up making it worse and you could be faced with a hefty bill to pay to repair the damage. We help, we repair, we care. Contact us for your water damage restoration needs in Savannah, GA, and surrounding areas.